UPS KENIKA HS 2000
– VA/W : 2 KVA / 1.4 KW
– Nominal Voltage : 110 VAC / 220 VAC
– Voltage Range : 60 – 138 VAC / 115 – 300 VAC
– Frequency Range : 46 – 54Hz(Default),User Adjustable Within 40 – 60Hz
– Power Factor : 0.97
– Voltage : 110 VAC / 220 VAC ±2%
– Frequency : 46 – 54HZ-+0.2Hz (Line Mode) 50Hz-+0.2Hz(Battery Mode)
– Waveform : SineWave
– Distortion : 4%
– Power Factor : 0.7
– Overload capability : 108% -150% for 30 seconds, -+150% for 300 ms
– Current Crest Ratio : 3:1
– Type : Sealed ,Maintenance Free, Lead-Acid
– Recharge Time : 8 hours to 90% of Capacity After Full Load Discharge
– Automatic Transfer : On Overload and UPS Failure
– Before UPS Power-ON : Default “NO”, User Adjustable to “YES”
– Transfer Time : 0 ms, Less than 4 ms form Inverter to Bypass and Vice Versa
– Status : Load Level/Battery Level, Battery, Utility Power, Inverter, Bypass, Overload, Fault
– Audible Alarm : Bypass, On Battery Mode, Battery Low, Overload, Fault
– At 1 meter Distance : 50dBA
– DB-9Port : RS-232 Serial Interface
– Interlligent Slot : Option, Webpower, As400 Card or WinPower CMC
– Operating Temperature : 0 ̊ – 40 ̊ C
– Operating Humidity : 20 – 90% Non-Condensing
W x D x H (mm) : 192 x 4
